SWTC1500WS Replacement Parts

Two piles of six foam sleeves.

Enclosure Foam (Set of 12)

Two blue pole caps.

Large Pole Cap - Blue - Qty 2

Self-tapping screw.

Self Tapping Screws - Qty 26

M5x50 mm bolt as seen from the front.

M5x50 mm Bolt - Qty4

Sold Out

Two lower enclosure straight tubes made from galvanized steel.

Lower Enclosure Straight Tube (Set of 2)

Spring puller to assist during assembly.

One lower enclosure straight tube made out of rust-resistant galvanized steel.

Lower Enclosure Straight Tube

Main frame top tube is made from galvanized steel and is designed for 15-foot round trampolines.

15' Round Main Frame Top Tube

Sold Out

Two green pole caps facing opposite directions.

Pole Cap - Green - Qty 2

Sold Out

The enclosure tube is made out of galvanized steel.

Upper Enclosure Curved Tube

Sold Out

Blue spring pad with black straps on it for securing around the trampoline frame.

15' Round Spring Pad - Blue

Phillips screw driver with comfortable black handle.

Screw Driver w/Black Handle

12 springs in a pile with a silver spring puller next to them.

6.5" Springs - 0.9" Diameter - Qty 12 with Spring Puller

The purple spring pad is designed for 15-foot round trampolines.

15' Round Spring Pad - Purple

The green, polyvinyl chloride spring pad is half an inch thick.

15' Round Spring Pad - Green

Polypropylene jump mat with 96 V-rings is designed for a 15-foot round trampoline.

15' Round Jump Mat with 96 V-Rings

Replacement W-leg brace part designed for 15-foot round trampolines.

Sold Out

Plastic black end cap for the T-socket.

End Cap (For T-Sockets) - Qty 4

Gold-colored steel T-socket for 15-foot round trampolines.